Optoelectronic protection is economical and efficient, protecting the personal safety of operators!

1. Working principle:

The photoelectric protection consists of five parts: light emitting device, light receiving device, controller, signal cable, and control cable (supporting PNP/NPN output). 

The light emitted by the illuminator is directed towards the receiver, forming a protective light curtain. When the light curtain is obstructed, the light receiver generates a light blocking signal, which is transmitted to the controller through a signal cable. The controller processes this signal to generate a control signal, which controls the braking control circuit of the machine tool or other equipment alarm devices to achieve machine tool parking or safety alarm.

2. Applicable photoelectric protection model:

SNA series safety light curtain:

Optical axis distance: 20mm, 40mm

Protection height: (number of optical axes -1) * optical axis distance

Suitable for protecting machine tools (machine table tops) or protected areas with a length of less than 3 meters.

SNB/C/D series safety light curtain:

Optical wheelbase: 20mm, 30mm, 40mm

Protection height: (number of optical axes -1) * optical axis distance

Suitable for protecting machine tools (machine table tops) or protected areas with a length of less than 8 meters.

STD series safety light curtain:

Optical axis distance: 20mm, 40mm

Protection height: (number of optical axes -1) * optical axis distance

Suitable for protecting machine tools (machine table tops) or protected areas with a length of less than 15 meters.

S4 series safety light curtain:

Optical wheelbase: 7.5mm, 15mm, 30mm

Protection height: (number of optical axes -1) * optical axis distance

Suitable for protecting machine tools (machine tables) or protection areas with a length of 0-6 meters or less.